ALBERICH² ARRAY SYSTEM

A towering Berlin wall of sound

The Alberich² Array System is a new and innovative audio product. It may seem like just the Hagen² speakers with an Alberich² woofer, but it’s much more. The system is 6 feet (1.8 meters) tall and uses the latest Hagen2 housings. It has three AF-1.9/2B drivers that work well with an optimized Alberich² woofer. A matching stand is included at the back. To ensure top audio quality, it uses pure copper cabling from Voxativ.

As a distinctive option, the entire system can be crafted from pure aluminum. This choice transcends mere aesthetics; each enclosure is meticulously constructed from aluminum plates, and expertly welded to ensure structural integrity. The outcome is a wholly resonance-free speaker system, delivering an auditory experience that will leave an indelible impression.

Components :

  1. Active Woofer Module: A new 10” Neodymium woofer that works in an optimized AST® Ripol housing. Powered by an active 500W class D amplifier. This operates by Line-In from your amplifier. It is a perfect match for our Voxativ T-211 Integrated Amp with regulated Preamp-Out.

  2. Hagen² Array: A combination of 2 different Hagen² monitors. Top and bottom are equipped with Voxativ AF-1.9 drivers. The one in the middle contains a set of AF-2B drivers for optimal highs up to 30kHz and perfect stereo image. And on request there is another one mounted in the back for ultimate room filling.

  3. Stand: Invisible Aluminium guidance in the back and bottom for optimal stability.

  4. Cabling: Proprietary Voxativ pure copper cabling.

And the sound?

Unlike Hagen² and Alberich² alone, the monitors create a vertical “Wall of Sound” that envelops you. By using three Hagen² with 2 x AF-1.9 drivers and 1 x AF-2B, the system combines sound pressure in the lower mids with remarkable resolution and a line array display. You'll feel as if you are inside the concert. The Alberich² Array requires a larger room to fully realize its potential. We will demonstrate this in our upcoming shows in 2025.

Norddeutsche HiFi Tage, February 1 to 2, Hamburg/D
Bristol Audio Show, February 21 to 23, Bristol/UK
SIAV, April 11 to 13, Shanghai/CN
Highend Munich, May 15 to 18, Munich/D

Alberich² Array in the Media

Stereophile Interview:
Ken Micallef talks with Inès Adler about the Voxativ Alberich Array

ALBERICH² ARRAY IN DETAIL

ALBERICH² ARRAY ALBERICH² ARRAY ALBERICH² ARRAY
ALBERICH² ARRAY
from €30,900.00

The new Voxativ Alberich² Array is a modular concept that can be configured multiple ways depending on your listening preferences.

This loudspeaker consists of three handcrafted components:
A set of Voxativ Hagen² monitors with new Voxativ AF-1.9 and AF-2B drivers which then sit upon a Voxativ Alberich² bass module.
Given the high-efficiency nature of our drivers, Alberich² Array pairs nicely with low wattage tube amps that also offer regulated pre-amp RCA outputs to connect to the active bass module.

Components:

  1. Hagen² monitors:
    With new Voxativ AF-1.9 drivers

  2. Hagen² monitors:
    With new Voxativ AF-2B drivers

  3. Alberich² Bass Modules
    With new Neodymium woofers

  4. The Stands
    An invisiible guidance in the back for optimal
    stability and resonance control

  5. The Cabling
    All connecting lines are pure copper

Frequency Response
20 - 33.000 Hz

Drivers
Bass-Module: Voxativ AC-ZB
Hagen² monitors: Voxativ AF-1.9 and AF-2B

Efficiency max.
101 dB / 2.83V / 1 m

Capacity 50 W sinus

Dimensions (W x H x D)
20,5 x 180 x 25 cm / 8" x 71" x 10"

Color
Berlin Black or Pure Metal

Weight
75/150kg / 150/300 lbs